How to Replace a Kia Sportage Replacement Key
The key of many Kia models comes with the keyless entry feature built in. kia remote key The Keylab resembles the remote control and can be changed with a new one from an Kia dealer or a locksmith.
Key fobs may stop working for a variety of reasons, such as batteries that are dead worn buttons signal interference, water damage and a damaged receiver module. Here are some helpful tips on how you can get your Kia Sportage replacement key to function again.
How do you replace a remote key or smartkey
The battery in your Kia's intelligent key will eventually need be replaced, whether it's a remote key as well as a push-to start key or a regular metal key that is not equipped with an electronic transponder. This is especially when the car displays a message telling that the remote or smart key has low battery power.
This is a relatively simple process. To replace the keyfob battery remove your mechanical key from the slit that is located at the back of the fob. Then, push the cover off. Inside the key fob, there will be tiny screws that hold the battery in its place. Remove the old battery by detaching the screw with a small screwdriver. Then, you can insert the new battery and close the slit on the key fob.
Test the key fob by pressing the lock and unlock buttons. If the doors unlock and lock in the same way, you're good to go! You can now use the hands-free feature to lock and unlock your Kia whenever your fingers start to get cold or you have to do some errands in Brandon.
Not all keys may require to be programmed (transponder chips or smart keys). This requires a special programming machine that only the dealer or locksmith can access. Other keys (non-transponder metal keys) don't require programming. If you need to reprogramme your key, it is necessary to note the key code's number on the key code tag.
How to replace a battery
If the Kia key fob is unable to respond to pressing the lock/unlock button, it's a sign that the battery is not fully charged. A weak battery can cause other issues like the check engine light flashing on or delayed engine cranking. It is easy to replace key fob batteries by using only a few simple tools.
Before beginning the process before beginning the process, ensure that your vehicle is off and that all doors are closed. Find the small metal or a plastic piece on the bottom of the key fob. Jiggle it until the key is released. This key can be put into the driver door handle to unlock your car.
To replace the battery inside the key fob remove the cover on the rear. Use a plastic pry tool to loosen up the latch that holds the black negative cable. Remove the old battery, and then orient the replacement battery to ensure that its "+" side faces you, and the "-" negative side is facing the fob's electrical contacts. Push the new CR2032 battery straight into place without putting too much force on it to avoid damaging or bending the metal contacts.
After installing the new battery, turn the key fob off and on in the ignition until the door locks up. Then, you can test your Kia key fob and see if it is working properly again.
How do you replace the smart key
You could have an ordinary keyfob or Smart Key depending on the model of Kia Sportage. The smart key is equipped with an embedded mechanical key blade however, the standard key fob does not. Both types of key fobs are equipped with batteries which eventually needs to be replaced. Luckily, this is quite simple and only takes about two minutes.
Before you begin, you will want to ensure that you are on a flat surface with good lighting and that the Kia is off. Be aware that there are tiny components inside the fob which could fall out if not cautious.
The first step is to locate the small release button on the back of the lower part of the fob. It could be a circular or rectangular slot. When you press it the mechanical key blade will appear and you will be able to open the key fob.
Once you have the key fob open, you can simply take off the old battery and replace it. The new battery should be a CR-2032 and can be bought online or from your local auto parts store. Once you're done you should be able to lock and unlock your car with your key fob - even if the engine isn't running!
How to replace a mechanical key
The Kia key fob is an amazing convenience that lets us lock and unlock our vehicle with the touch of the button. But, as with all devices, it can have problems at times. There are solutions to solve these issues and keep your key fobs running for an extended period of time.
One of the most frequently encountered problems is a dead or dead battery. This can cause your device to stop working or operate intermittently. If this happens, try replacing the battery with a new one.
If this doesn't fix the problem, try using a standard flathead screwdriver to open the casing of the fob's plastic. Be careful not to damage any internal components or scratch the plastic. Once the battery is removed, replace it with a brand new one.
Close and open the door with the mechanical key. (Every kia fob comes with an emergency mechanical key which will fit into the slot). Test the key fob to confirm it's functioning correctly. Contact a dealer locksmith to resolve the problem in the event that the fob is not working. To avoid locking outs in the future, ensure you have an emergency key that will work on all trunk and door cylinders.